A chimney leak almost always travels the same path: a cracked crown lets rain in at the top, it soaks into the brick core, tracks down inside the stack, finds the ceiling framing, and shows up as a brown stain weeks or months after the original entry point failed. By then the damage is well ahead of what you can see. We get on the roof, isolate exactly where the water is entering — crown, mortar joints, flashing, or the brick itself — and fix it there, not just paint over the symptoms.
Chimney Repair & Rebuilding in Surrey: What's Included
- Crown rebuilds with flexible elastomeric crown coat
- Above-roofline chimney rebuilds from a sound course
- Step flashing and counter-flashing replacement
- Full chimney repointing and spalled brick replacement
- Stainless steel chimney caps and spark arrestors
- Firebox and smoke chamber brick repair
- Chimney waterproofing treatment (vapour-permeable sealer)
When to Call for Chimney Repair & Rebuilding in Surrey
Brown stains on the ceiling near the fireplace wall
Water is tracking down from somewhere above the roofline. The stain appears long after the water first entered, so the path needs tracing to the source.
White deposits inside the firebox
Efflorescence inside the firebox means moisture is moving through the brick from outside. The crown or joints above are letting water into the stack.
The chimney has a visible lean or separation
A stack pulling away from the house has a foundation or structural mortar problem. It won't stop moving on its own.
Our Chimney Repair & Rebuilding Process in Surrey
- 1
Roof inspection with photos
We get on the roof, photograph the crown, cap, flashing, mortar condition and brick, and walk you through exactly what's failing and why.
- 2
Isolate the failure zone
We separate crown problems from flashing problems from joint problems, because each has a different fix.
- 3
Repair or full rebuild
Minor joint and crown work is repaired in place. Stacks that are too far gone we take down to a solid course and rebuild with fresh brick and mortar.
- 4
Flash, cap and seal
New step and counter-flashing is set into the brick, the crown is poured or coated, a stainless cap goes on, and we test for water tightness.
Recent Chimney Repair & Rebuilding Work
Stone veneer chimney
Chimney Repair & Rebuilding across Surrey & the Lower Mainland
We handle chimney repair & rebuilding across Surrey and the surrounding Metro Vancouver, including Guildford, Newton, Cloverdale, Fleetwood and South Surrey.
See all areas we serveCommon Questions
Surrey Masonry FAQs
Usually, yes. Most chimney leaks come from a cracked crown, failed flashing or washed-out mortar near the top. We get up there, find the source and fix it so the water stops.
Need a Mason in Surrey? Call Today.
Give us a call or request a free estimate. We'll come take a look, tell you what's needed and quote it straight, no pressure.
Serving Surrey & the Metro Vancouver